← All articles

Podcast Audio File Size: How Many MB Is an Hour of Audio?

By the WEB7TOOLS team · November 9, 2026

3D illustration of stacked storage drives for audio files

An hour of podcast audio can be 29 MB or more than 1 GB, depending on the format you choose. This guide shows the real numbers for MP3 and WAV, how to work out the size of any episode and how to plan storage for a year of publishing.

Why audio file size matters

File size looks like a technical detail, but it affects several everyday decisions. Podcast hosts often limit monthly uploads or total storage, so the size of each episode helps you choose a plan. Large files take longer to upload and to send to an editor. Listeners who download on mobile data notice a 90 MB episode more than a 40 MB one. And if you publish an audiobook, platforms such as ACX set exact format rules.

The simple formula

For compressed audio such as MP3, size depends on two things: the bitrate and the length. Use this formula:

Size in MB = bitrate (kbps) × seconds ÷ 8 ÷ 1,000

For example, a 128 kbps MP3 that runs for one hour (3,600 seconds) is 128 × 3,600 ÷ 8 ÷ 1,000 = 57.6 MB. If you would rather not do the maths, our free audio file size calculator does it for you and also shows monthly and yearly storage.

File sizes by format and setting

This table uses decimal megabytes (1 MB = 1,000,000 bytes), the same way most hosts and file managers report size. WAV is uncompressed, so its size is set by the sample rate, bit depth and number of channels.

FormatSettingPer minutePer hour
MP364 kbps mono0.48 MB28.8 MB
MP396 kbps0.72 MB43.2 MB
MP3128 kbps stereo0.96 MB57.6 MB
MP3192 kbps1.44 MB86.4 MB
MP3320 kbps2.40 MB144.0 MB
WAV44.1 kHz, 16-bit, mono5,292.00 MB317.52 GB
WAV44.1 kHz, 16-bit, stereo10,584.00 MB635.04 GB
WAV48 kHz, 24-bit, mono8,640.00 MB518.40 GB
WAV48 kHz, 24-bit, stereo17,280.00 MB1,036.80 GB
3D illustration of an audio mixing console with sliders and knobs

Which setting should you use?

  • Recording and editing: record and keep your master as WAV, at 44.1 kHz or 48 kHz. Editing uncompressed audio avoids repeated quality loss.
  • Publishing a podcast: a 128 kbps stereo MP3 is a safe default for speech. A solo or interview show can often use 96 kbps or a 64 kbps mono file and still sound clear.
  • Music-heavy shows: choose 192 kbps or higher, because music shows compression more than speech.
  • Audiobooks for ACX: ACX asks for MP3 files at 192 kbps constant bitrate and 44.1 kHz, so plan on about 86.4 MB per hour of finished audio. See our ACX-ready audiobook guide for the full checklist.

Mono or stereo for speech?

Voice is usually recorded on one microphone per person, so a mono file carries all the information that matters. Exporting mono halves the file size compared with stereo at the same quality settings. Use stereo when you have music, sound design or a deliberate left and right mix.

Plan a year of storage

Suppose you publish one 45-minute episode every week. A 128 kbps MP3 is about 43.2 MB per episode, which is about 2.25 GB across 52 episodes. If you also keep the 44.1 kHz, 16-bit stereo WAV masters, each one is about 476.3 MB, or about 24.8 GB for the year. That is roughly ten times more, so many producers keep masters on a separate drive or cloud backup and upload only the MP3 to their host.

3D illustration of a cloud with an upload arrow for podcast hosting

Five ways to keep files small without hurting quality

  1. Export mono for solo and interview shows.
  2. Trim long silences and false starts before exporting.
  3. Use 96 or 128 kbps for speech instead of 192 or 320.
  4. Export once from the WAV master rather than re-compressing an MP3.
  5. Check the size of a finished file against your host’s upload limit before launch day.

Keep going

Once your file is the right size, the next step is helping people find the episode. Writing show notes? Our word and character counter shows how long your description is and how long it takes to read aloud. New to publishing? Read the beginner’s guide to launching a podcast, then use these podcast promotion strategies to reach listeners. If you would rather have a team handle editing, mastering and export, see our podcast production services.

Frequently asked questions

How big is one hour of MP3 audio?

At 128 kbps stereo, one hour is about 57.6 MB. At 64 kbps mono it is about 28.8 MB, and at 192 kbps it is about 86.4 MB.

How big is one hour of WAV audio?

A 44.1 kHz, 16-bit stereo WAV is about 635 MB per hour. A 48 kHz, 24-bit stereo WAV is about 1.04 GB per hour.

Does a higher bitrate always sound better?

Not always. Speech reaches good quality at modest bitrates, so going from 128 kbps to 320 kbps mostly makes the file bigger. Music benefits more from higher bitrates than voice does.

Is the calculated size exact?

It is very close for constant bitrate files. Variable bitrate files, embedded cover art and tags change the final size slightly.

What upload limit does my podcast host have?

Limits differ by host and plan, and some count monthly uploads while others count total storage. Check your host’s current plan details, then use your size per episode to see how many episodes fit.

Need help with your podcast audio?

Try the free calculator, or let our team edit, master and export your episodes.

Open the Free Calculator

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top