Podcast Audio File Size: A Simple Guide to Bitrate, Length and Storage
How big will your episode be? The answer decides how much storage you need, how fast you can upload and what your listeners download. This guide shows how podcast audio file size works, gives you real numbers for the most common formats and points you to a free calculator so you never have to guess.
Why file size matters for podcasters
File size affects almost every step after recording. A large master file takes up drive space and takes longer to upload to your host. A large published file uses more data for listeners on mobile connections and can slow down downloads. Knowing the size in advance helps you pick settings that keep the sound clean without wasting space.
The simple formula behind every audio file
Compressed audio such as MP3 has a bitrate, which is how many kilobits of audio are stored for each second. To find the size, multiply the bitrate by the length in seconds and divide by 8 to convert bits to bytes.
Example: a 60-minute episode at 128 kbps is 128,000 bits × 3,600 seconds ÷ 8 = 57.6 MB.
Uncompressed audio such as WAV works from the sample rate, the bit depth and the number of channels. Multiply those three numbers together to get bits per second, then use the same steps as above.
Podcast audio file sizes at a glance
These sizes use decimal megabytes (1 MB is 1,000,000 bytes). Your computer may show slightly smaller numbers because some systems count in binary units.
| Format | Per minute | Per hour | Good for |
|---|---|---|---|
| MP3, 64 kbps, mono | 0.48 MB | 28.8 MB | Talk-only shows where small files matter |
| MP3, 96 kbps, mono or stereo | 0.72 MB | 43.2 MB | Spoken word with good clarity |
| MP3, 128 kbps, stereo | 0.96 MB | 57.6 MB | The common choice for most podcasts |
| MP3, 192 kbps, stereo | 1.44 MB | 86.4 MB | Music-heavy shows and ACX audiobooks |
| WAV, 44.1 kHz, 16-bit, mono | 5.29 MB | 317.5 MB | Voice recording and editing |
| WAV, 44.1 kHz, 16-bit, stereo | 10.58 MB | 635.0 MB | Standard stereo master |
| WAV, 48 kHz, 24-bit, stereo | 17.28 MB | 1,036.8 MB | High-resolution video and studio work |
How to choose the right bitrate
- Speech-only show: 64 to 96 kbps mono is often enough, and 128 kbps stereo is a safe default.
- Show with music or sound design: use 128 to 192 kbps stereo so the music stays clean.
- Audiobook for ACX: ACX asks for 192 kbps MP3 files, so size the finished chapters with that in mind. Our ACX audiobook guide covers the full list of requirements.
- Video podcast: keep a 48 kHz master for the video edit and export a smaller MP3 for audio platforms.
Mono or stereo for a talk show?
A mono file stores one channel, so it is about half the size of the same recording in stereo. If your show is voices only, mono can halve your file size with no change a listener will notice. Choose stereo when you have music, sound effects or spatial audio that you want to keep.
Record in WAV, publish in MP3
A common workflow is to record and edit in WAV, then export a final MP3 for publishing. WAV keeps every detail while you edit, and MP3 keeps the published file small. Keep your WAV masters in a safe place so you can re-export later if your settings change. If you are still setting up your show, our beginner’s guide to launching a podcast walks through recording, editing and hosting step by step.
Plan your storage and hosting
Multiply the size of one episode by the number of episodes you plan to publish. A weekly 45-minute show at 128 kbps is about 43.2 MB per episode, which comes to roughly 2.2 GB over a year of MP3s. The same show recorded in 44.1 kHz stereo WAV would need about 28 GB for the masters. Check your host’s upload and storage limits before you commit to a plan, since these differ between providers.
Ways to keep files small without hurting quality
- Trim long silences and false starts before you export.
- Use mono for single-voice or interview shows without music.
- Export at 128 kbps unless you have a clear reason to go higher.
- Use a constant bitrate if your host or platform asks for it.
- Check the final file on headphones and a phone speaker before you publish.
Use the free calculator
You do not need to do the math by hand. Our free audio file size calculator estimates the size of an MP3 or WAV file from its length and settings. It runs in your browser, needs no sign-up and works for podcasts and audiobooks. Planning show notes as well? Try the word and character counter to check how long your episode description is.
When to get help
If you would rather hand off the technical work, our team can edit, master and export your audio to the right settings. See our podcast production services and audiobook production services, or read how to choose a podcast production and marketing agency. Once your episodes sound right, our podcast promotion packs help more people find them.
Frequently asked questions
How big is a 1-hour podcast episode?
At 128 kbps MP3 a one-hour episode is about 57.6 MB. At 64 kbps mono it is about 28.8 MB, and as a 44.1 kHz 16-bit stereo WAV it is about 635 MB.
What bitrate should I use for a podcast?
128 kbps is a safe default for most shows. Speech-only shows can use 64 to 96 kbps mono, and music-heavy shows can use up to 192 kbps.
Is MP3 or WAV better for podcasting?
Use WAV for recording and editing because it keeps full detail, and publish an MP3 because it is far smaller. Check what your host accepts before you upload.
Why does my computer show a different size?
Some systems count in binary units, where 1 MB is 1,048,576 bytes, so they show a slightly smaller number. The calculator gives a close estimate, and the exact size depends on your encoder and metadata.
Need help with your podcast audio?
Try the free calculator now, or tell us about your project and we will suggest a plan.
Open the Free Calculator